| Tools | |
|---|---|
|
|
|
| Model | |
| Room | Metalworking Room |
| Work envelope/max capacity | |
| Link to manual | |
| Related tools | |
| Trainer(s) | |
| Training Sessions | no training sessions include this tool |
| Knowledge keeper(s) | |
| Training document(s) | |
| Material Safety Data Sheet (MSDS) | |
| Safe Work Procedure | |
| Consumables | |
| Software | this machine has no software listed |
| Equipment type | safety |
| Metalworking Room Precautions apply |
|
You will be working in the Metalworking Room . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: SafetyThere are many things happening in this room that could hurt bystanders as well as operators (fumes, blinding lights, noise). Always be vigilant when working in this room: alert any bystanders if your work could harm them, and be aware that other people may start doing hazardous work at any time. Metal will be hot after certain operations (welding, forging, turning); do not touch random metal that's lying around (especially on the welding table) unless you know it is safe (use an IR thermometer to check). Potential hazards
Housekeeping
|
The spill kit is in a bucket next to the Global Max 1508 Waterjet System.
Spill kits at North Forge
- We have the following spill kits:
- Use the spill kits to clean up spills of anything other than water
- Dispose of the used kits appropriately for the hazard of any cleaned up material
- If you use a spill kit, post on #125-safety Slack channel so we can make sure the kit is re-plenished
- If the spill created any kind of safety concern, also fill out an Incident Report Form