National U6 4812 Brake

Tools
Model
Room	Metalworking Room
Work envelope/max capacity	(Yield Strength 30,000 lbs. @ rated capacity); Mild Steel: 12 Gauge: 2.7mm; Stainless Steel: 16 Gauge: 1.6mm; Finger width: 2"; Maximum Depth of Box: 6"; Bending Length: 49"/1245mm;
Link to manual	https://www.trick-tools.com/common/documentation/u6-4812_manual.pdf
Related tools	;
Trainer(s)
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables
Software	this machine has no software listed
Equipment type	tool

Metalworking Room Precautions apply
You will be working in the Metalworking Room . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: Safety There are many things happening in this room that could hurt bystanders as well as operators (fumes, blinding lights, noise). Always be vigilant when working in this room: alert any bystanders if your work could harm them, and be aware that other people may start doing hazardous work at any time. Metal will be hot after certain operations (welding, forging, turning); do not touch random metal that's lying around (especially on the welding table) unless you know it is safe (use an IR thermometer to check). Potential hazards Noise Fire Fumes Dust Lacerations Blinding lights Burn RUSes (Rodents of Unusual Size) Housekeeping Dispose of scrap metal in the Metal recycling bin (metal room)

sections can be removed from the brake to bend corners and smaller parts; replace the sections as you found them when you are done so no parts go missing.

Safety