Formech FM660 Vacuum Forming Machine

Tools
	<img alt="Picture of Formech FM660 Vacuum Forming Machine in the fablab" src="/images/1/1b/NF_no_photo.png" decoding="async" width="300" height="300" class="mw-file-element">
Model	Formech FM660
Room	General Assembly Area
Work envelope/max capacity	26"" x 26"" x 16""
Link to manual
Related tools	;
Trainer(s)	Avery-Anne Gervais
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables
Software	this machine has no software listed
Equipment type	tool

General Assembly Area Precautions apply
You will be working in the General Assembly Area . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: Others in this area might not be wearing full PPE, be mindful in what you do. If you're going to do work that could harm others, it's best to warn them and make sure they either put on PPE or leave the area. Be particularly careful when cutting with materials or tools that can shatter easily (eg removing PLA supports, using Dremel with a cutoff disk). People nearby may not be wearing their safety glasses. Don't do serious sanding, grinding, air cleaning in here (in general, limit the amount of stuff that's going into the air). We do not currently have any dust or fume extraction in the main assembly area.