Model
PL-1340E-1.0
Room No room assigned
Work envelope/max capacity
Distance Between Centers (In.): 40"
Leadscrew Thread Pitch: 8 T.P.I.
Length of Gap: 5"
Spindle Bore: 1.50"
Spindle Diameter: 1.65"
Spindle Taper: Morse #3
Spindle Travel: 4.5"
Link to manual
Related tools
Trainer(s)
Training Sessions
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables
Software this machine has no software listed
Equipment type
tool
edit these instructions at Instructions:Baileigh Lathe
Safety Hazards Entanglement hazard: getting sucked into the lathe will result in death or dismemberment. Do not:
Wear loose hair, clothing, jewellery, earbuds, etc. NO HOODIES OR GLOVES. TIE BACK long sleeves.
Reach over the chuck while the spindle is running
Clear chips, change tools, or measure parts while the spindle is running
Use the equipment if you're tired, distracted, intoxicated, or otherwise impaired Projectile hazard: objects and chips being thrown by the lathe. Do not:
Operate without wearing safety glasses
Leave parts or tools on the headstock, tailstock, or carriage
Operate the lathe if the part or the chuck is not properly secured
Leave chuck keys in the chuck when starting the lathe
Take excessively deep/aggressive cuts
Use automatic feed when close to the chuck Laceration hazard: sharp parts and tools. Do not:
Clear chips with bare hands
Handle sharp tools or parts carelessly Safety features Emergency stop
Foot brake
Interlocked chuck cover
Spring-loaded chuck key
Chip guards Housekeeping and Tool Care Board to protect ways when changing chuck
Not using compressed air to clean
Protecting ways with drop cloth when sanding
Wipe ways before starting due to grinding dust?
Cleaning chips when done: nothing on carriage or ways, empty chip tray when a layer of chips has formed on the bottom
https://baileigh.com/metal-lathe-pl-1340e
