GW Oscilloscope GOS-622G

GeneralInstructions

Tools
Model
Room	IoT Innovation Lab
Work envelope/max capacity
Link to manual
Related tools
Trainer(s)	No Training Available
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables
Software	this machine has no software listed
Equipment type	tool

IoT Innovation Lab Precautions apply

You will be working in the IoT Innovation Lab . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: WORK IN PROGRESS Tools and consumables in this room contain toxic chemicals, lead, and are a fire risk. Equipment in this room can carry dangerously high voltage and current. NO EATING OR DRINKING IN THE IoT INNOVATION LAB. Safety committee swabbed surfaces for lead and found that there was a lot of residual lead on the workbenches, and you don't want to risk ingesting it. When working with any liquids or emulsions (including water, flux, cleaning products, solder paste, etc,) ensure you have paper towels nearby to contain and clean up a spill. When working with any hazardous chemicals or substances (eg. solder paste, flux, cleaning products, etchant, etc) you must wear nitrile gloves and eye protection. Keep flammables, such as isopropyl alcohol, away from sources of heat, such as soldering irons, hot air guns, and PCB preheaters There is a lead solder disposal bucket available for disposing of lead solder

Instructions:GW Oscilloscope GOS-622G doesn't exist yet