Instructions:Aspire: Difference between revisions

From North Forge
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
Ttenbergen (talk | contribs)
2,304 edits
No edit summary
m Outline
Line 1: Line 1:
This is a spot for information about Vectric Aspire.
This is a spot for information about Vectric Aspire.


# Create new part
## Stock setup opens by default
## Material X and Y dimensions: align long dimension of stock with X (long) axis of ShopBot for convenience
## Material thickness: measure with calipers
## Z zero: suggest zero to bottom of stock (top of spoilboard) to reduce impact of measuring errors
# Import DXF
# Resize and position DXF
# Check DXF for open loops
# Tool setup
# Pocket cuts
# Profile cuts
## Inside/Outside/On
## Tabs
# Drill
# Preview
# Export
## SBP inch


[[Category:Software]]
[[index.php?title=Category:Software]]

Revision as of 07:56, 2024 August 16

This is a spot for information about Vectric Aspire.

  1. Create new part
    1. Stock setup opens by default
    2. Material X and Y dimensions: align long dimension of stock with X (long) axis of ShopBot for convenience
    3. Material thickness: measure with calipers
    4. Z zero: suggest zero to bottom of stock (top of spoilboard) to reduce impact of measuring errors
  2. Import DXF
  3. Resize and position DXF
  4. Check DXF for open loops
  5. Tool setup
  6. Pocket cuts
  7. Profile cuts
    1. Inside/Outside/On
    2. Tabs
  8. Drill
  9. Preview
  10. Export
    1. SBP inch

index.php?title=Category:Software

Retrieved from "https://wiki.northforge.ca/index.php?title=Instructions:Aspire&oldid=2693"