Editing Instructions:Giant Blue Laser

{{Discuss |Photos: Raster table and vector grid, control panel icons}}

=== Startup ===

# Turn the laser on using the key
# Install the correct table for the operation type
## Vector cut-through operations: use the vector grid
## Raster operations: use the raster table
# Install the correct lens for the operation type

=== Control Panel ===

* Status indicator
* Reset
* Focus menu
** Things not to adjust
* Pointer
* Jog menu
* Trace
* Power and Speed
* Job Menu
* Settings Menu (do not touch)

=== Running a Job ===

==== Positioning ====

===== Camera Positioning =====

===== Positional Engraving =====

==== Process Settings ====

==== Focus and Home ====
Do not use auto-focus or manual focus from the Epilog Dashboard - North Forge maintenance staff have made adjustments to improve performance, and these options are no longer accurate. Ensure Auto-Focus is OFF in the Epilog Dashboard before proceeding and auto-focus using the control panel.

==== Lens and Mirror Cleaning ====

==== Lens Install ====

=== Shutdown ===