Editing Instructions:Formlabs Form 2 Resin 3D Printer (LovingCosset) (section)

==Consumables==
North Forge supplies resin and invoices members at {some amount} per mL:
*Always include your name in the file name that you send to the printer.
*If you bring your own materials, include that information in the file name (ie "JohnHOwnMatl").
*Always fill out the consumables sheet beside the computer. Include the material type and amount used. All material costs the same amount.
*If the consumables sheet is missing or full, post your usage on the consumables channel on [[Slack]] and ask for the sheet to be replaced.
*If you get a "low resin" warning when trying to print, post in the consumables channel on [[Slack]] to ask for more.
*Members can bring their own resin but use North Forge tanks, in which case they will be charged {a lower amount} to account for tank wear and tear.
*Members can bring their own tank and resin, in which case they will only be charged {a much lower amount} to account for power, IPA use, and general wear and tear.