Editing Instructions:Sawstop Industrial Cabinet Saw (section)

==Safety==
'''Do''':
*Use the proper blade for the task and material
*Use a splitter and riving knife wherever possible
*Test the material against the SawStop before starting
*Stand to one side of the blade to avoid kickback
*Use safety devices like push sticks, featherboards, sleds, fixtures

'''Do not''':
*Cut pieces that are wider than they are deep without a miter gauge or sled.
*Cut freehand - always use a fence, sled, featherboard, etc to guide the workpiece.
*Stand or allow others to stand in the kickback zone (directly in front of and behind the blade).
*Allow hands to come within 6” of the blade in any direction - use a push stick, sled, or fixture if required.
*Cut wood that is warped, cracked, or otherwise damaged such that it can shatter or kick back when cut.

===Emergency Stop===
The blade can be stopped by pressing the red power paddle.