Editing Instructions:Laguna Bandsaw (section)

== Operating Procedure ==

# Remove the clamp and tension sign from the blade. {{Discuss|Do we want to include instructions on where to put the sign to maximize chances of re-applying it and remembering to untension? }}
# Apply tension to the blade using the tension lever.
# Set the blade guard to slightly above the height of the workpiece.
# Set the fence if required - note that fence may not be square by default and may require shims. Consult trainer or manual for assistance.
# Prepare any safety devices (featherboard, push blocks, sleds for round pieces etc)
# Carefully feed the material through the saw, letting the blade do the work.

[[File:Band Saw Tensioning V2a.jpg|thumb|400x400px|left]]
<div style="clear: both"></div>