Editing Instructions:ShopBot 3-Axis CNC Mill (section)

==== Disassembly ====
1. Unload the tool from the ShopBot.
*Support the tool holder from the bottom
*Press the green button; tool holder will fall out

2. Unscrew holder and remove collet and nut.
*Load the tool holder into the fixture
*Use the wrench to unscrew the nut

[[File:Nftakeapart1.jpg|thumb|200x200px|left|Remove collet and nut]]
<div style="clear: both"></div>

3. Remove the collet by pushing with thumbs.

[[File:Nftakeapart2.jpg|thumb|200x200px|left|Push sideways]]
<div style="clear: both"></div>

4. Replace the collet and nut in the drawer and tool holder on the shelf when done.