Editing Instructions:Laguna Bandsaw (section)

== Safety ==
Do:

* Check that the fence is square if required
* Make sure the blade on the large band saw is tensioned before use and de-tensioned after use
* Lower the guard so it is close to the workpiece before starting
* Ensure the blade is fully stopped before leaving the area
* Check beside the blade for trapped debris when done

'''Do not:'''

* Cut round workpieces without a sled or fixture
* Attempt to change the blade without prior training
* Let fingers come close to the blade - use a push stick if required, especially at the end of cuts
* Leave the equipment while the blade is still moving - the band saw blade takes a long time to slow down without the brake
* Use excessive force - let the blade do the work
* Continue working if you notice sparks from the guard - you may be pressing too hard, or the guard guides may need to be adjusted

=== Emergency Stop ===
The band saw can be stopped by pressing the stop button and applying the foot brake (on the right side of the equipment).