Editing Instructions:Big Blue Laser (section)

=== Safety ===
In case of fire:

# Briefly open the lid to cut off the power. See if the fire continues on its own or if the laser beam is fuelling it.
# If it is safe to do so, remove any burning workpieces and extinguish them outside of the laser (smothering, water, fire extinguisher)
# If it is not safe to remove the workpiece, use the fire extinguisher in the laser.

Things that can cause fires:

* Passing over the same spot in vector mode when cutting wood
* Improper work surface (always use vector tray or pin grid when cutting)
* Trying to cut multiple layers of fabric at the same time
* Debris in the debris tray
* Cutting non-suitable materials
* Laser is out of focus